Front Seat Heater Control Module Replacement

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Heater Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Bucket Seat Replacement .
1	Front Heated Seat Module Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Front Heated Seat Module Procedure Disconnect the electrical connector. If a replacement module is installed, program the module. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure:
Remove the front seat. Refer to Bucket Seat Replacement .

Front Heated Seat Module Screw (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb in)

Front Heated Seat Module

Procedure

Disconnect the electrical connector.
If a replacement module is installed, program the module. Refer to Control Module References .