LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Electrical >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Battery And Cables
    GM1544743Courtesy of GENERAL MOTORS CORP.
    NOTE: Clean any existing corrosion from the battery terminal bolt and the battery cable.
  1. Install the negative battery cable to the battery.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the negative battery cable (2) nut and tighten to 16 N.m (12 lb ft)  .
  3. Reprogram the radio presets. Refer to Radio Programming and Setup .
  4. Re-initialize the power sliding doors. Refer to Rear Side Door Actuator Control Module Programming and Setup .
scientia non olet · About LEMON Manuals