Circuit/System Testing
- Ignition OFF and all vehicle systems OFF, disconnect the harness connector at the K17 electronic brake control module, ignition ON.
- Test for less than 1 V between the K17 electronic brake control module harness connector terminals listed below and ground:
- B5LF left front wheel speed sensor - terminal 21
- B5RF right front wheel speed sensor - terminal 18
- B5LR left rear wheel speed sensor - terminal 33
- B5RR right rear wheel speed sensor - terminal 19
- If 1 V or greater
Repair the short to voltage on the circuit.
- If less than 1 V
- All OK.