LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Camaro V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oil Pressure Sensor: Service and Repair




Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement Service and Repair.





2. Disconnect the oil pressure sensor electrical connector.

3. Remove the oil pressure sensor (1).

Installation Procedure





Caution:
Refer to Fastener Caution Fastener Caution.

1. Install the oil pressure sensor (1) and tighten to 20 Nm (15 lb ft).

2. Connect the oil pressure sensor electrical connector.

3. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement Service and Repair.

scientia non olet · About LEMON Manuals