TCM Reprogramming
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.
- If the TCM needs to be reprogrammed, refer to Service Programming System (SPS) .
- Perform the Reset Transmission Adapts - Refer to Reset Transmission Adapts .
- Turn the ignition OFF for 30 seconds.
- Turn the ignition ON with the engine OFF.
- Use the scan tool in order to retrieve history DTCs from all modules.
- Clear all history DTCs.
NOTE:
After programming, perform the following to avoid future misdiagnosis: