LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 2330 (Programming And Setup - All Systems) >> Repair Instructions >> Object Alarm Module Programming & Setup >> Parking Assist Control Module Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Parking Assist Control Module Reprogramming

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.

Do not reprogram the parking assist control module, unless directed by a service procedure, or a service bulletin.

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) 
  2. Perform the SPS function Parking Assist Control Module Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the programming procedure.