Theft Deterrent Module Replacement

WARNING: This page is about a different car, the 2013 GMC Savana, 2013 GMC RV Cutaway, 2013 GMC Cutaway, 2013 Chevrolet RV Cutaway, and 2013 Chevrolet Express. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Theft Deterrent Module Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Disable the SIR. Refer to SIR Disabling and Enabling . Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement .
1	Theft Deterrent Module Assembly Procedure Pull the theft deterrent module out away from lock cylinder case and disconnect the electrical connector. Refer to Control Module References for programing and setup of the theft deterrent control module after replacement..

Callout

Component Name

Preliminary Procedure

Disable the SIR. Refer to SIR Disabling and Enabling .
Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement .

Theft Deterrent Module Assembly

Procedure

Pull the theft deterrent module out away from lock cylinder case and disconnect the electrical connector.
Refer to Control Module References for programing and setup of the theft deterrent control module after replacement..