LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Chevy Express H1500, Van Cargo >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Turn Signal And Multifunction Switch Assembly
    GM2215420Courtesy of GENERAL MOTORS COMPANY
  1. Install the turn signal and multifunction switch assembly (2) to the steering column tilt head assembly.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 2 screws (1) to the turn signal and multifunction assembly and tighten to 3 N.m (27 lb in).
  3. Connect the turn signal and multifunction switch assembly connector.
  4. Install the upper and lower trim covers. Refer to Steering Column Trim Cover Replacement .
  5. Install the steering wheel. Refer to Steering Wheel Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals