LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement (LS3, LS7) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement (LS3, LS7) , Power Steering Pump Pulley Replacement (LS9) .
  2. Remove the remote power steering fluid reservoir. Refer to Power Steering Fluid Reservoir Replacement (LS3, LS7) , Power Steering Fluid Reservoir Replacement (LS9) .
  3. Disconnect the power steering fluid reservoir outlet hose from the power steering pump. Refer to Power Steering Fluid Reservoir Outlet Hose Replacement (LS3, LS7) .
  4. Disconnect the power steering pressure hose from the power steering pump. Refer to Power Steering Pressure Pipe/Hose Replacement (LS3, LS7) .
    5. Fig 1: Power Steering Pump Rear Bracket, Power Steering Pump & Mounting Bolts
    GM663512Courtesy of GENERAL MOTORS COMPANY
  5. Remove the power steering pump bolts (4) from the power steering pump (2).
  6. Remove the following components from the power steering pump rear bracket (1):
    • The power steering pump front bracket (3)
    • The power steering pump (2)
scientia non olet · About LEMON Manuals