Component Testing
WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
Static Test
- Ignition OFF, disconnect the harness connector at the S75 Traction Control Switch.
- Test for infinite resistance between the signal circuit terminal 2 and the ground circuit terminal 4 with the switch in the released position.
- If not within the specified range, replace the S75 Traction Control Switch.
- Test for less than 5 Ω between the signal circuit terminal 2 and the ground circuit terminal 4 with the switch in the pressed position.
- If not within the specified range, replace the S75 Traction Control Switch.