Removal Procedure
- Place the ignition switch in the OFF position.
- Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
- Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
- Without draining the engine coolant and without disconnecting the hoses, remove the nuts and position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement .
- Clean the area surrounding the electronic brake control module (EBCM) to brake pressure modulator valve (BPMV) mating surfaces.
- Disconnect the EBCM electrical connector.
- Remove the EBCM bolts (1).
- Separate the EBCM (1) from the BPMV.
- Clean the sealing surfaces of the BPMV with denatured alcohol and a clean cloth.
CAUTION:
To prevent equipment damage, never connect or disconnect the wiring harness connection from the EBCM with the ignition switch in the ON position.
NOTE:
Do not pry the components apart.