LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Orlando LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls/Fuel - 2.4L - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Inspection/Maintenance Complete System Set Procedure >> Description
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection/Maintenance Complete System Set Procedure: Description

The purpose of the Inspection/Maintenance Complete System Set Procedure is to satisfy the enable criteria necessary to execute all of the I/M readiness diagnostics and complete the drive cycles for those particular diagnostics. When all I/M monitored diagnostic tests are completed, the I/M System Status indicators are set to YES. Perform the Inspection/Maintenance Complete System Set Procedure if any I/M System Status indicators are set to NO.

Inspection/Maintenance Data List 

To determine if the inspection/maintenance readiness diagnostic tests can be run this ignition cycle, use a scan tool to observe the inspection/maintenance monitor enabled parameters in the inspection/maintenance Data List.

scientia non olet · About LEMON Manuals