Calibration Procedure
WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the parking brake.
- Place the transmission in the PARK position.
- Install a scan tool.
- Clear all BCM DTCs before proceeding.
- Navigate to the Vehicle Control Systems menu.
- Select Module Setup menu item.
- Select BCM menu item.
- Select the BPP Sensor Calibration procedure and follow the directions displayed on the screen.
- Perform the Engine Control Module (ECM) brake pedal position sensor calibration. Refer to Brake Pedal Position Sensor Learn .