LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Battery, Charging System And Starting System) >> Repair Instructions >> Auxiliary Battery Positive Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Fuse Block Cover
    GM2235660Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the auxiliary battery positive cable nut (2) to the fuse block.Tighten to 15 N.m (11 lb ft).
    2. Fig 2: View Of Auxiliary Battery Positive Cable
    GM2232747Courtesy of GENERAL MOTORS CORP.
  2. Install the auxiliary battery positive terminal nut (1) to the back of the generator.Tighten to 15 N.m (11 lb ft).
  3. Install the auxiliary battery positive terminal nut (2) to the starter solenoid.Tighten to 15 N.m (11 lb ft).
  4. Connect the negative battery cable.Refer to Battery Negative Cable Disconnection and Connection 
scientia non olet · About LEMON Manuals