Steering Angle Sensor Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Angle Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the inflatable restraint steering wheel module coil. Refer to Steering Wheel Airbag Coil Replacement .
1	Steering Angle Sensor Procedure Disconnect any electrical connectors as needed. Squeeze the plastic retaining tabs on the supplemental inflatable restraint steering wheel module coil to release and disengage the steering angle sensor. After installation, center the steering angle sensor. Refer to Steering Angle Sensor Centering .

Callout

Component Name

Preliminary Procedure
Remove the inflatable restraint steering wheel module coil. Refer to Steering Wheel Airbag Coil Replacement .

Steering Angle Sensor

Procedure

Disconnect any electrical connectors as needed.
Squeeze the plastic retaining tabs on the supplemental inflatable restraint steering wheel module coil to release and disengage the steering angle sensor.
After installation, center the steering angle sensor. Refer to Steering Angle Sensor Centering .