Water Outlet Replacement

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Water Outlet Housing

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the radiator inlet hose. Refer to Radiator Inlet Hose Replacement . Remove the right engine mount strut bracket.Refer to ENGINE MOUNT STRUT BRACKET REPLACEMENT - RIGHT SIDE .
1	Water Outlet Housing Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Remove the water outlet housing bolts. Tighten 10 N.m (89 lb in)
2	Water Outlet Housing
3	Seal Procedure Remove the water outlet housing seal. Discard the seal. Install a new water outlet housing seal.