Installation Procedure
WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Position the negative battery cable to the battery box. (battery shown removed for clarity).
- Install the negative battery cable ground bolt (2).
Tighten
Tighten the bolt to 25 N.m (18 lb ft).
- Connect the body wiring harness electrical connector (4) to the negative battery cable electrical connector (1).
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .