Removal Procedure
WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
- Always route the replacement cable the same way as the original cable.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Disconnect the body wiring harness electrical connector (4) from the negative battery cable electrical connector (1).
- Remove the negative battery cable ground bolt (2). (battery shown removed for clarity).
- Remove the negative battery cable.