Fastener Tightening Specifications

WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Front Frame Mounting Bolt
First Pass	100 N.m	74 lb ft
Second Pass	90°
Front Frame Reinforcement Mounting Bolt	50 N.m	37 lb ft
Power Steering Fluid Cooler Nut	30 N.m	22 lb in
Power Steering Gear Inlet and Outlet Pipe Clip Bolt	9 N.m	80 lb in
Power Steering Gear Inlet Hose Bracket Nut	9 N.m	80 lb in
Power Steering Gear Inlet Hose Fitting	34 N.m	25 lb ft
Power Steering Gear Inlet Hose Retaining Plate Bolt	12 N.m	106 lb in
Power Steering Gear Outlet Hose Bracket Bolt	9 N.m	80 lb in
Power Steering Gear Outlet Hose Bracket Nut	9 N.m	80 lb in
Power Steering Pump Bolt	50 N.m	37 lb ft
Rear Front Frame Mounting Bolt	100 N.m	74 lb ft
Remote Power Steering Fluid Reservoir Bolt	9 N.m	80 lb in
Remote Power Steering Fluid Reservoir Bracket Bolt	9 N.m	80 lb in
Steering Gear Bolt at the right side	100 N.m	74 lb ft
Steering Gear Nut at the left side	180 N.m	133 lb ft
Steering Gear Heat Shield Bolt	9 N.m	80 lb in
Steering Gear Valve Solenoid Bolt	8 N.m	71 lb in
Steering Linkage Inner Tie Rod Housing	100 N.m	74 lb ft
Steering Linkage Inner Tie Rod Nut	75 N.m	55 lb ft
Steering Linkage Outer Tie Rod Nut
First Pass	30 N.m	22 lb ft
Second Pass	120°