Installation Procedure
WARNING: This page is about a different car, the 2013 GMC Acadia, 2013 Chevrolet Traverse, and 2013 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors.
- Install the mirror glass to the house.
- Align the mirror glass retaining tabs with the motor.
- Place your hand on the back of the mirror housing.
- Using the flat part of your hand press inward until the mirror glass fully seats onto the motor retaining tabs.
- Inspect the power mirror for proper operation.
- Remove the masking tape.
- Place the front side door window in the full up position.