Rear Camber Adjustment
WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the adjuster cam nut (1).
- Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.
- Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1) to:
- First Pass: 70 N.m (52 lb ft)
- Final Pass: plus 70 degrees
- Check the toe alignment and adjust if required. Refer to Rear Toe Adjustment .
- Test drive the vehicle.
CAUTION:
Refer to Fastener Caution .
NOTE:
Ensure that the camber settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.