Liftgate Close Actuator Bracket Replacement

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Liftgate Close Actuator Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the body side trim panel. Refer to Quarter Lower Rear Trim Panel Replacement (Traverse with TB5)Quarter Lower Rear Trim Panel Replacement (Traverse with TB4)Quarter Lower Rear Trim Panel Replacement (Enclave with TB5)Quarter Lower Rear Trim Panel Replacement (Enclave with TB4)Quarter Lower Rear Trim Panel Replacement (Acadia with TB5)Quarter Lower Rear Trim Panel Replacement (Acadia with TB4) . Remove the liftgate close actuator control module. Refer to Liftgate Actuator Replacement .
1	Liftgate Close Actuator Bracket Bolt (Qty: 5) CAUTION: Refer to Fastener Caution . Tighten 30 N.m (22 lb ft)
2	Liftgate Close Actuator Bracket

Callout

Component Name

Preliminary Procedures

Remove the body side trim panel. Refer to Quarter Lower Rear Trim Panel Replacement (Traverse with TB5)Quarter Lower Rear Trim Panel Replacement (Traverse with TB4)Quarter Lower Rear Trim Panel Replacement (Enclave with TB5)Quarter Lower Rear Trim Panel Replacement (Enclave with TB4)Quarter Lower Rear Trim Panel Replacement (Acadia with TB5)Quarter Lower Rear Trim Panel Replacement (Acadia with TB4) .
Remove the liftgate close actuator control module. Refer to Liftgate Actuator Replacement .

Liftgate Close Actuator Bracket Bolt (Qty: 5)

CAUTION:

Refer to Fastener Caution .

Tighten
30 N.m (22 lb ft)

Liftgate Close Actuator Bracket