LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2012 >> Traverse LS, AWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Fluid Reservoir Bracket Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove the right side engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement - Right Side .
  3. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
  4. Place drain pans under the vehicle as needed.
    5. Fig 1: Identifying Power Steering Reservoir Inlet Hose & Clamp
    GM1856010Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the power steering reservoir inlet hose (1).
    6. Fig 2: View Of Power Steering Fluid Reservoir Outlet Hose & Clamp
    GM1856009Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the power steering fluid reservoir outlet hose (1).
    7. Fig 3: Identifying Power Steering Fluid Reservoir Bracket & Bolts
    GM2075295Courtesy of GENERAL MOTORS COMPANY
  7. Remove the remote power steering fluid reservoir bracket bolts (1).
  8. Remove the remote power steering fluid reservoir bracket (2).
  9. Transfer any parts as needed.
scientia non olet · About LEMON Manuals