LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Silverado 1500 XFE >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Rear Sliding Window Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the rear sliding window motor/module assembly to the vehicle.
    2. Fig 1: View Of Sliding Window Motor Module & Components
    GM1852042Courtesy of GENERAL MOTORS COMPANY
  2. Connect the rear sliding window electrical connectors to the motor/module and relays (1).
    3. Fig 2: View Of Regulator & Screw
    GM1852031Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the rear sliding window motor/module nuts (2).

    Tighten 

    Tighten nut to 10 N.m (89 lb in).

  4. Install the rear sliding window regulator and cables (2) to the motor/module .
  5. Install the bolt (1) to the rear sliding window regulator and cables (2).

    Tighten 

    Tighten bolt to 11 N.m (97 lb in).

  6. Install the rear sliding window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Regular Cab) , Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48) , Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48) .
  7. Inspect the rear sliding window for proper operation.
scientia non olet · About LEMON Manuals