LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Silverado 1500 XFE >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Repair Instructions >> Rear Sliding Window Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    NOTE:

    The new rear sliding window motor/module is equipped with the bracket and relays.

  1. Remove the rear sliding window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Regular Cab) , Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48) , Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48) .
    2. Fig 1: View Of Regulator & Screw
    GM1852031Courtesy of GENERAL MOTORS COMPANY
  2. Cycle the rear sliding window to the fully closed position.
  3. Remove the screw (1) from the rear sliding window regulator and cables (2).
  4. Pull forward on the regulator and cables (2) to release it from the motor/module.
    5. Fig 2: View Of Sliding Window Motor Module & Components
    GM1852042Courtesy of GENERAL MOTORS COMPANY
  5. Remove the rear sliding window motor/module nuts (2).
  6. Disconnect the rear sliding window electrical connectors from the motor/module and relays (1).
  7. Remove the rear sliding window motor/module assembly from the vehicle.
scientia non olet · About LEMON Manuals