LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Sonic RS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Current Sensor, Negative Cable & Mounting Components
    GM2507827Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the battery current sensor from the body harness connector.
  3. Unclip the battery current sensor from the battery tray.
  4. Remove the battery tray. Refer to Battery Tray Replacement .
  5. Remove the battery negative cable frame ground nut (4) and terminal (5).
    6. Fig 2: Battery Negative Cable And Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Observe the position of the battery current sensor when removing.

  6. Slide the battery current sensor (2) off the battery negative cable (1).
scientia non olet · About LEMON Manuals