Circuit/System Verification
NOTE:
Since most occurrences of this DTC are caused by excessive driver inputs, review the conditions under which the DTC sets with the customer.
- Verify the DTC sets outside the conditions for running and setting the DTC.
- If the DTC sets within the conditions for running and setting the DTC
The power steering system is operating as designed
- If the DTC sets outside the conditions for running and setting the DTC
- If the DTC sets within the conditions for running and setting the DTC
- Operate the vehicle within the conditions that the customer experienced.
- Verify that the DTC does not set.
- If the DTC sets
Replace the K43 Power Steering Control Module
- If the DTC does not set
- If the DTC sets
- All OK.