LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Spark LS, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.2L >> Specifications >> Engine Mechanical Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Mechanical Specifications

1.2L (LL0)

Application Specification
Metric English
General Data
  • Engine Type
 4 Cylinder (In-Line)
  • Displacement
 1249 cm3
  • Bore - Stroke
 70.5-80 mm 2.7756- 3.1496 in
  • Compression Ratio
 10.5
  • Firing Order
 1-3-4-2
  • Engine Idle Speed
 670 RPM (A/C OFF)
800 RPM (A/C ON)
Cylinder Bore
  • Diameter
 70.5 mm 2.7756 in
  • Out of Round (Maximum)
 0.0005 mm 0.0000197 in
Piston
  • Diameter
 70.5 mm 2.7756 in
  • Clearance to Bore
 0.023-0.053 mm 0.00091-0.00209 in
Piston Rings
Piston Ring End Gap
  • Top Ring
 0.15-0.30 mm 0.0059-0.0118 in
  • 2nd Ring
 0.30-0.45 mm 0.0118-0.0177 in
  • Oil Ring
 0.20-0.70 mm 0.0078-0.0276 in
Groove Clearance
  • Top Ring
 0.03-0.07 mm 0.0118-0.00276 in
  • 2nd Ring
 0.03-0.07 mm 0.0118-0.00276 in
  • Oil Ring
 0.04-0.12 mm 0.00157-0.00472 in
Piston Pin
  • Diameter
 17.996-18.000 mm 0.7085-0.7087 in
  • Pin Clearance to Piston Bore
 0.006 -0.014 mm 0.00024-0.00055 in
Camshaft
  • End Play
 0.08-0.26 mm 0.00314-0.01024 in
Journal OD
  • No. 1
 31.934-31.95 mm 1.2572-1.2579 in
  • No. 2
 22.939-22.96 mm 0.9031-0.9039 in
  • No. 3
 22.939-22.96 mm 0.9031-0.9039 in
  • No. 4
 22.939-22.96 mm 0.9031-0.9039 in
  • No. 5
 22.939-22.96 mm 0.9031-0.9039 in
Journal ID
  • No. 1
 32-32.021 mm 1.2598-1.2607 in
  • No. 2
 23-23.021 mm 0.9055-0.9063 in
  • No. 3
 23-23.021 mm 0.9055-0.9063 in
  • No. 4
 23-23.021 mm 0.9055-0.9063 in
  • No. 5
 23-23.021 mm 0.9055-0.9063 in
Crankshaft
Main Journal
  • Diameter (All)
 48.979-48.995 mm 1.9283-1.9289 in
  • Main Bearing Clearance (All)
 0.018-0.058 mm 0.00071-0.00228 in
  • Crankshaft End Play
 0.08-0.29 mm 0.00314-0.01142 in
Connecting Rod Journal
  • Diameter (All)
 37.979-37.995 mm 1.4952-1.4959 in
  • Rod Bearing Clearance (All)
 0.02-0.06 mm 0.00079-0.00236 in
  • End Play
 0.1-0.25 mm 0.00393-0.00984 in
Valve System
Seat Inner Diameter
  • Intake
 23.862 mm 0.9394 in
  • Exhaust
 21.079 mm 0.8299 in
  • Valve Guide Inside Diameter (All)
 5.0-5.012 mm 0.1969-0.1973 in
Valve Stem Diameter
  • Intake
 4.972 ± 0.007 mm 0.1957 ± 0.00028 in
  • Exhaust
 4.963-0.007 mm 0.1954-0.00028 in
Valve Length
  • Intake
 87.16 ± 0.225 mm 3.4315-0.00886 in
  • Exhaust
 88.18 ± 0.225 mm 3.4717 ± 0.00886 in
Valve Spring
  • Free Length
 46.52 mm 1.8315 in
  • Valve Closed
 260 ± 13 N (1919.6 lbs) @ 32 mm (1.25 in)
scientia non olet · About LEMON Manuals