Fuel Tank Fuel Pump Module Replacement (LFM)

WARNING: This page is about a different car, the 2014 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Tank Fuel Pump Module (LFM)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Relieve the fuel pressure. Refer to Fuel Pressure Relief . Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . Fold rear seat, remove fuel pump cover, and disconnect fuel line and wiring harness.
1	Fuel Pump Lock Ring Procedure Remove fuel pump lock ring using EN-50167 ring. Special Tools EN-50167 Fuel Pump Lock Ring Remover/Installer For equivalent regional tools, refer to Special Tools (Diagnostic Tools) .
2	Fuel Pump Procedure Remove fuel pump assemble above.

Callout

Component Name

Preliminary Procedures

Relieve the fuel pressure. Refer to Fuel Pressure Relief .
Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
Fold rear seat, remove fuel pump cover, and disconnect fuel line and wiring harness.

Fuel Pump Lock Ring
Procedure
Remove fuel pump lock ring using EN-50167 ring.
Special Tools
EN-50167 Fuel Pump Lock Ring Remover/Installer
For equivalent regional tools, refer to Special Tools (Diagnostic Tools) .

Fuel Pump
Procedure
Remove fuel pump assemble above.