LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System And Pedestrian Protection System >> Repair Instructions >> Rear Parking Assist Alarm Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Rear Bumper Fascia
    GM2327692Courtesy of GENERAL MOTORS COMPANY
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Disconnect electrical connector from the rear object sensor.
  3. Rotate the housing counterclockwise and remove the rear object sensor.