LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Ignition Can/Cannot Be Turned Off with Transmission in Any Gear >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

Ignition Lock Cylinder Control Switch

  1. Ignition OFF, disconnect the harness connector at the ignition lock cylinder control switch.
  2. Test for infinite resistance between terminal A and terminal B with the switch in the open position.
    • If less than specified, replace the ignition lock cylinder control switch.
  3. Test for less than 2 ohms between terminal A and terminal B with the switch in the closed position.
    • If greater than the specified range, replace the ignition lock cylinder control switch.
scientia non olet · About LEMON Manuals