Blower Motor Control Module Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Blower Motor Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the I/P lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement . Remove the right side floor front air outlet duct. Refer to Floor Front Air Outlet Duct Replacement - Right Side . Reposition any wiring or hoses to gain access to blower motor control.
1	Blower Motor Control Module Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (17 lb in)
2	Blower Motor Control Module Procedure Disconnect the wiring connector.

Callout

Component Name

Preliminary Procedures

Remove the I/P lower trim panel insulator. Refer to Instrument Panel Lower Trim Panel Insulator Replacement .
Remove the right side floor front air outlet duct. Refer to Floor Front Air Outlet Duct Replacement - Right Side .
Reposition any wiring or hoses to gain access to blower motor control.

Blower Motor Control Module Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
2 N.m (17 lb in)

Blower Motor Control Module
Procedure
Disconnect the wiring connector.