LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2013 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Antilock Brake System) >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition is turned ON, the stabilitrak indicator lamp should illuminate, then after 5 seconds it should turn OFF.

  1. Vehicle in Service Mode.
  2. Verify the instrument cluster traction control/stability control-active indicator turns ON and OFF when commanding the All Indicators ON and OFF with a scan tool.
    • If the indicator does not turn ON and OFF 

      Replace the P16 instrument cluster.

    • If the indicator turns ON and OFF 
  3. All OK.