Circuit/System Verification
- Ignition ON.
- Verify that DTC B1405 is not set.
- If the DTC is set
Refer to DTC B1405
- If the DTC is not set
- If the DTC is set
- Verify that DTC B095801, B095901, B096001 or B096101 is not set.
- If the DTC is set
Check the appropriate sensor for contamination with mud. If no contamination is diagnosed, refer to Circuit/System Testing.
- If the DTC is not set
- If the DTC is set
- Verify that DTC B095821, B095921, B096021 or B096121 is not set.
- If the DTC is set
Check the appropriate sensor for contamination with mud, ice or snow. If no contamination is diagnosed, replace the sensor.
- If the DTC is not set
- If the DTC is set
- Verify that DTC B09583A, B09593A, B09603A or B09613A is not set.
- If the DTC is set
Replace the appropriate sensor with a sensor of correct sensor type.
- If the DTC is not set
- If the DTC is set
- Ignition ON, transmission in REVERSE, verify the scan tool Parking Assist System Status parameter displays Enabled.
- If the Parking Assist System displays Disabled
Refer to Circuit/System Testing.
- If the Parking Assist System displays Enabled
- If the Parking Assist System displays Disabled
- All OK.