Section 325 (Data Communication System)
WARNING: This page is about a different car, the 2015 GMC Terrain and 2015 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Schematic Wiring Diagrams
- Data Communication Wiring Schematics
- Low Speed GMLAN (1 of 2)
- Low Speed GMLAN (2 of 2)
- High Speed GMLAN (1 of 2)
- High Speed GMLAN (2 of 2)
- Enable Serial Data
- BCM Linear Interconnect Network (LIN) Bus 1, 2, 3, 4, and Memory Seat LIN Bus
- Radio/HVAC Linear Interconnect Network (LIN) Bus and CAN Graphical Interface
- Chassis Expansion Bus
- Powertrain Expansion Bus
- Body Control System Wiring Schematics
- Data Communication Wiring Schematics
- Diagnostic Information and Procedures
- Control Module U Code List
- DTC B1000: Electronic Control Unit
- DTC B1001: Option Configuration
- DTC B101D: Electronic Control Unit Hardware
- DTC B101E: Electronic Control Unit Software
- DTC C056D: Electronic Control Unit Hardware
- DTC C056E: Electronic Control Unit Software
- DTC P0601-P0606, P060A, P062F, or P262B: Control Module
- DTC U0001: High Speed CAN Communication Bus Malfunction
- DTC U0020: Low Speed CAN Bus
- DTC U0073 or U2100: Control Module Communication Bus A Off
- DTC U0074: Control Module Communication Powertrain Expansion CAN Bus Off Malfunction
- DTC U0077: Control Module Communication Chassis Expansion CAN Bus Off
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U0078: Control Module Communication Low Speed CAN Bus Off
- DTC U0100 - U02FF: Control Module U Code List
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U0300 - U0336: Control Module U Code List
- DTC U0400 - U05FF: Control Module U Code List
- DTC U1500-U15FF: Control Module U Code List
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U1814: Powertrain Wake-Up Communication Circuit
- DTC U1826 or U1827: Lost Communication
- Diagnostic Instructions
- DTC Descriptors
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U18A2: Lost Communication with Fuel Pump Driver Control Module
- Diagnostic Instructions
- DTC Descriptors
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U18B9-U18BF: Primary/Secondary High Speed CAN Bus Subnet Configuration List
- DTC U2099: High Speed Communication Enable Circuit
- DTC U2616: Fuel Pump Driver Control Module Lost Communication with ECM
- Diagnostic Instructions
- DTC Descriptors
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U2101: CAN Bus Maximum List of Control Modules
- DTC U2105-U2199: Control Module U Code List
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- DTC U3000: Control Module
- Diagnostic Instructions
- DTC Descriptor
- Diagnostic Fault Information
- Circuit/System Description
- Conditions for Running the DTC
- Conditions for Setting the DTC
- Action Taken When the DTC Sets
- Conditions for Clearing the DTC
- Diagnostic Aids
- Reference Information
- Circuit/System Verification
- Circuit/System Testing
- Repair Instructions
- Symptoms - Data Communications
- Scan Tool Does Not Power Up
- Scan Tool Does Not Communicate with Chassis High Speed GMLAN Device
- Scan Tool Does Not Communicate with High Speed GMLAN Device
- Scan Tool Does Not Communicate with Low Speed GMLAN Device
- Data Link References
- Repair Instructions
- Description and Operation
- Body Control System Description and Operation
- Data Link Communications Description and Operation
- Notes
- Circuit Description
- High Speed GMLAN Circuit Description
- Chassis High Speed GMLAN Circuit Description
- Object High Speed GMLAN Circuit Description
- Media Oriented Systems Transport (MOST) Circuit Description
- CAN Graphical Interface (CGI) Circuit Description
- Mid Speed GMLAN Circuit Description
- Low Speed GMLAN Circuit Description
- Local Interconnect Network (LIN) Circuit Description
- Communication Enable Circuit Description
- Data Link Connector (DLC)
- Serial Data Reference