Installation Procedure
- Install the rear run channel (1) to the door.
- Install the bolt (2) in order to retain the rear run channel (1) to the door.
Tighten
Tighten the retaining bolt to 11 N.m (97 lb in).
- Install the front door window to the door from the outside of the vehicle.
- Install the nuts (3) in order to retain the front door window to the sash.
Tighten
Tighten the retaining nuts to 11 N.m (97 lb in).
- Install the front run channel (1) to the door.
- Install the bolt (2) in order to retain the front run channel (1) to the door.
Tighten
Tighten the retaining bolt to 11 N.m (97 lb in).
- Adjust window channel for proper alignment.
- Install the inner window sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
- Install the outer window sealing strip. Refer to Outer Belt Sealing Strip Replacement .
- Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
- Install the front door rear garnish. Refer to Front Side Door Rear Garnish Molding Replacement .
- Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
CAUTION:
Refer to Fastener Caution .
NOTE:
Lower the front door window.