Removal Procedure
- Remove the rear compartment side trim panel. Refer to Rear Compartment Side Trim Panel Replacement (Left Side) , Rear Compartment Side Trim Panel Replacement (Right Side) .
- Remove the rear compartment floor panel carpet. Refer to Rear Compartment Floor Panel Carpet Replacement .
- Remove the passenger front seat. Refer to Driver or Passenger Seat Removal and Installation .
- Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Removal and Installation (Split Folding Side Cushion Sedan) , Rear Seat Back Cushion Removal and Installation (Split Folding Center Cushion Sedan) , Rear Seat Back Cushion Removal and Installation (Fixed Back) .
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the battery positive cable cover (5).
- Disconnect the battery positive cable connector (2) from the accessory relay block (1).
- Disconnect the battery positive cable connector (3) from the body harness connector (4).
- Loosen the battery positive cable clamp fastener (1) and remove the battery positive cable (2), from the battery.
- Detach the battery positive cable retainers (1) from the body harness conduit.
- Slide the battery positive cable (2) through the back seat opening.
- Within the rear passenger compartment area, detach the battery positive cable retainers (1) along the body harness conduit.
- Detach the battery positive cable retainers (1) from the floor panel tunnel.
- Remove the battery positive cable cover (3) and remove the battery positive cable passthrough fastener (2).
- Remove the battery positive cable (1) from the passenger compartment.