September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Body Control Module Replacement
Courtesy of GENERAL MOTORS COMPANY Body Control Module Replacement
| Callout |
Component Name |
Preliminary Procedure
Remove the body hinge pillar garnish molding - right side. Refer to Body Hinge Pillar Garnish Molding Replacement
. |
| 1 |
Body Control Module Procedure
- Disconnect the electrical connectors.
- Push tabs to release the body control module from the bracket.
- Reprogram the module if replaced. Refer to Control Module References
.
|