LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Traverse LS, 4D Utility >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Radiator Replacement

Fig 1: Identifying Radiator
GM1864161Courtesy of GENERAL MOTORS COMPANY
Radiator Replacement

Callout Component Name

Preliminary Procedure

  1. Drain the coolant. Refer to Cooling System Draining and Filling (Static Fill) , Cooling System Draining and Filling (Vac N Fill) .
  2. Remove radiator inlet hose. Refer to Radiator Inlet Hose Replacement .
  3. Remove radiator outlet hose. Refer to Radiator Outlet Hose Replacement .
  4. Remove fan shroud top mounting bolts and pushpin from radiator and position fan shroud rearward. Refer to Cooling Fan and Shroud Replacement .
  5. Remove transmission inlet cooling hose from radiator. Refer to Fluid Cooler Inlet Hose Replacement .
  6. Remove transmission outlet cooling hose from radiator. Refer to Fluid Cooler Outlet Hose Replacement .
  7. Remove coolant reservoir hose from radiator filler neck.
  8. Remove the front bumper fascia upper support. Refer to Front Bumper Fascia Upper Support Replacement (Acadia, Enclave, Traverse) .
  9. Pinch fastening tabs together at top of condenser to remove from radiator and position forward.
  10. Remove side rubber air deflectors from radiator tanks.
1 Radiator Mounting Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten 
10 N.m (89 lb in)
2 Radiator
NOTE:
  • Bottom of condenser mounts into holding fixtures at bottom of radiator.
  • Radiator will slide out between the condenser and fan shroud.
scientia non olet · About LEMON Manuals