LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Traverse LS, 4D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Battery, Charging System And Starting System) >> Repair Instructions >> Starter Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

WARNING: This page is about a different car, the 2015 GMC Acadia, 2015 Chevrolet Traverse, and 2015 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Starter Heat Shield Bolt & Shield
    GM1861146Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the left catalytic convertor. Refer to Catalytic Converter Replacement - Left Side .
  3. Remove the starter heat shield bolt and shield.
    4. Fig 2: View Of Battery Positive Junction Block Cable Clip & Cable Terminal
    GM1861148Courtesy of GENERAL MOTORS COMPANY
  4. Remove the starter solenoid BAT terminal nut (3).
  5. Remove the battery positive junction block cable terminal (2) from the starter.
    6. Fig 3: Identifying Engine Wiring Harness Electrical Connector
    GM1860484Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the engine wiring harness electrical connector (1) from the starter.
    7. Fig 4: View Of Starter Bolts & Starter
    GM1861149Courtesy of GENERAL MOTORS COMPANY
  7. Remove the starter bolts and starter.
scientia non olet · About LEMON Manuals