Installation Procedure
WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery (2) into the battery tray.
- Install the battery hold down strap (2) and tighten the fastener (1) to 22 N.m (16 lb ft).
- Install the battery fuse block (3) to the battery positive post and tighten the battery positive post clamp fastener (1) to 4.5 N.m (40 lb in).
- Install the battery fuse block cover (2).
- Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9) Battery Negative Cable Disconnection and Connection (with KL9) .
CAUTION:
Refer to Fastener Caution .