LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2014 >> Trax LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Antilock Brake System) >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electronic Brake Control Module
    GM2770240Courtesy of GENERAL MOTORS COMPANY
  1. Install the EBCM (1) to the BPMV.
    2. Fig 2: EBCM Bolts
    GM2770238Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the EBCM bolts (1) and tighten to 3 N.m (26 lb in).
  3. Install the BPMV with EBCM and bracket assembly. Refer to Brake Pressure Modulator Valve Replacement .
  4. Install the battery tray. Refer to Battery Tray Replacement .
  5. Program the EBCM. Refer to Control Module References .
scientia non olet · About LEMON Manuals