LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Pipe Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install a NEW lower exhaust gas recirculation pipe gasket (5).
    Fig 1: Exhaust Gas Recirculation Pipe And Upper Exhaust Gas Recirculation Pipe Gasket
    GM2949086Courtesy of GENERAL MOTORS COMPANY
  2. Install a NEW upper exhaust gas recirculation pipe gasket (1).
  3. Install the exhaust gas recirculation pipe (3).
  4. Install the 2 exhaust gas recirculation pipe bolts (2) and tighten to 8 N.m (71 lb in).
    CAUTION: Refer to Fastener Caution .
  5. Install the 2 exhaust gas recirculation pipe bolts (4) and tighten to 9 N.m (80 lb in).
  6. Install the EGR valve temperature sensor position 2. Refer to Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 2 .
  7. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
scientia non olet · About LEMON Manuals