LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Exhaust Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the exhaust pressure sensor (2).
    Fig 1: Exhaust Pressure Sensor
    GM2966398Courtesy of GENERAL MOTORS COMPANY
  2. Connect the wiring harness plug to exhaust pressure sensor (2).
  3. Install the 2 hoses (3) to the exhaust pressure sensor (2).
  4. Install the 2 clamps (4).
  5. Install the exhaust pressure sensor nut (1) and tighten to 8 N.m (70 lb in).
    CAUTION: Refer to Fastener Caution .
  6. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
  7. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals