LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LUJ, LUV) - Repair Instructions >> Repair Instructions >> Fuel Pressure Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: Refer to Safety Goggles and Fuel Warning .
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the fuel pressure sensor wiring harness plug (2) from the fuel pressure sensor (1).
    Fig 1: Fuel Pressure Sensor
    GM2373081Courtesy of GENERAL MOTORS COMPANY
  5. Place a appropriate container/drain pan to catch excess fuel.
    Fig 2: Fuel Pressure Sensor And Fuel Pressure Relief Valve
    GM2373082Courtesy of GENERAL MOTORS COMPANY
  6. Remove the fuel pressure sensor (1) from the fuel pressure line (2).
  7. Remove the fuel pressure sensor seal ring (3).