Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

Ensure that the steering wheel is set in a straight ahead position.

Fig 1: Inner Tie Rod And Jam Nut
Courtesy of GENERAL MOTORS COMPANY
Loosen the tie rod jam nut (1).
Adjust the toe to specification by turning the inner tie rod (2). Refer to Wheel Alignment Specifications .
Tighten the tie rod jam nut (1) to 60 N.m (44 lb ft).
CAUTION: Refer to Fastener Caution .
Center the steering angle sensor. Refer to Steering Angle Sensor Centering .