LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LUJ, LUV) - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the ignition coil.
  2. Remove EN-6009  remover (1) from the ignition coil (2).
    Fig 1: Ignition Coil And Special Tool
    GM2191365Courtesy of GENERAL MOTORS COMPANY
  3. Install the 2 ignition coil bolts (1) and tighten to 8 N.m (71 lb in).
    Fig 2: Ignition Coil Bolts
    GM2191364Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  4. Connect the ignition coil wiring harness plug (2) to the ignition coil (1).
    Fig 3: Ignition Coil And Ignition Coil Wiring Harness Plug
    GM2191363Courtesy of GENERAL MOTORS COMPANY
  5. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
scientia non olet · About LEMON Manuals