LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2015 >> Impala Limited LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Anti-Lock Brake System) >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EBCM (1) to the HCU.
    Fig 1: EBCM
    GM2911765Courtesy of GENERAL MOTORS COMPANY
  2. Install the EBCM bolts (1) and tighten to 5 N.m (44 lb in).
    Fig 2: EBCM Bolts
    GM2911763Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  3. Install the EBTCM assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
  4. Program the EBCM. Refer to Control Module References .
scientia non olet · About LEMON Manuals