Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Rear Drive Shaft to Rear Hub Retaining Nut | ||
| There are two alternate methods of achieving the required Rear Hub Retaining Nut torque.
IMPORTANT:
DO NOT EXCEED THE SPECIFIED TIGHTENING VALUES, otherwise premature bearing failure may result. |
||
| Preferred Method | ||
|
350 N.m | 258 lb ft |
|
loosen 180 Degrees | |
|
350 N.m | 258 lb ft |
| Alternate Method | ||
|
150 N.m | 110 lb ft |
|
loosen 180 Degrees | |
|
50 N.m | 37 lb ft |
|
30 Degrees | |