Transmission Fluid Cooler Replacement

Fig 1: Transmission Fluid Cooler Lower Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Open the hood. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the front bumper impact bar. Refer to Front Bumper Impact Bar Replacement . Remove the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement . Cap the fittings and plug the holes when removing the transmission fluid auxiliary cooler pipes. Place a drain pan under the transmission fluid auxiliary cooler pipes.
1	Transmission Fluid Cooler Retainer (Qty: 2) Procedure Disconnect the quick connect fittings.
2	Transmission Fluid Cooler Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 5 N.m (44 lb in)
3	Transmission Fluid Cooler Procedure Inspect the transmission oil level. Refer to Transmission Fluid Level and Condition Check . Inspect for transmission oil leaks.